文化创意视角下的食用菌产品包装设计分析

包装是展示产品特征、传递产品信息的重要载体,其中呈现的视觉形象、引发的审美体验直接关系到产品的辨识度,影响消费者的购买决策行为。通过分析文化创意视角下开展食用菌产品包装设计的原则,指出文化创意与产品包装设计的融合有利于展示食用菌产品特性,提升产品的审美内涵。从生态健康、情感和文化内涵等角度开展包装设计,使食用菌产品包装既生态又具创意。     

自然保护地巡护道路设计中几个主要指标的确定

自然保护地原则上按核心区和一般管控区实行分区管控。各类保护地巡护道路设计体系目前没有相关设计规范。文章对保护地内巡护道路的等级、平纵设计指标、横断面指标的确定需考虑的因素进行分析,提出了相应的设计指标和参数,以期对后续巡护道路设计提供参考。     

一种改进的CRLP最大许用操作压力设计方法

与传统管线钢管相比,复合材料增强管线钢管(CompositeReinforcedLinePipe,CRLP)具有承压能力高和质量轻等优势,但对其压力设计的研究尚不充分。CSAZ662-2015《油气管道系统》和GB/T35185—2017《石油天然气工业用复合材料增强管线钢管》中最大许用操作压力的设计思路不同,且设计结果差别较大。针对此问题,基于组合薄壁圆筒模型对承压CRLP进行分析,对最大许用操作压力下材料的名义许用应力和真实许用应力进行了区分,进而导出真实许用应力的显式表达形式,并以此作为设计安全裕度的评价指标。分析表明:现有规范和标准中的设计公式均无法保证管线钢和复合材料的真实许用应力为常量,对应两种设计方法,各组分材料的真实许用应力均随CRLP规格差异而发生变化,并且随着试压/预应力处理的历程而改变。基于上述分析和CRLP极限状态下的承载特征,提出一种改进的压力设计方法。新方法优先保证复合材料的真实许用应力为常量,并可由设计系数直接确定;在最大许用操作压力的计算中,考虑了加载历程的影响,物理意义明确。算例表明,其设计安全裕度较现有方法更为合理,对于CRLP压力设计的改进有参考价值。     

海洋芽孢杆菌N11-8产蛋白酶的发酵条件优化

本研究采用响应面法(RSM)对南极海洋芽孢杆菌(Bacillus sp.)N11-8液体发酵产蛋白酶PBN11-8的发酵条件进行快速优化。通过单因素实验初步确定南极海洋芽孢杆菌N11-8产蛋白酶的最佳碳源和氮源分别为可溶性淀粉和蛋白胨；并通过Plackett-Burman(PB)设计对影响其产酶相关因素进行评估，筛选出具有显著效应的3个因素：温度、氮源和碳源；以最陡爬坡实验逼近至上述因子最大响应区域，进而采用RSM法对其最佳水平范围进行研究，确定最优发酵条件为：可溶性淀粉3 g/L，蛋白胨13.1 g/L，酵母浸粉2.9 g/L，NaCl 5 g/L，KH2PO4 1 g/L，FeCl3·6H2O 2 mmol/L，初始pH值为7.0，温度为34.0℃，转速为200 r/min，装液量为50 ml/250 ml，接种量为4%，培养时间为60 h。最终优化后的酶活达到90.5 U/ml，比初始酶活提高了23.6%。     

Modeling height-diameter relationship for artificial monoculture Metasequoia glyptostroboides in sub-tropic coastal megacity Shanghai,China

Tree height is a key variable in forest monitoring studies and for forest management. However, tree height measurement is time consuming, and the recommended procedure is to use estimates from tree height (H) - diameter at breast height (DBH) models. Increasingly, H-DBH models are being developed for urban forests, providing tools to forest management and ecosystem services estimation. Here, we compared model forms and approaches for predicting H as a function of DBH and additional stand level covariates variables. Four model forms were evaluated: (i) basic models (which only used DBH as predictor variable); (ii) generalized models (which used DBH and other predictor variables based on the best basic model); (iii) a mixed-effects model based on the best basic model; and (iv) a mixed-effects model based on the generalized model. Several sampling designs aimed at minimizing height measurement were tested in terms of accuracy and applicability. Taking predicted accuracy and investigation cost into account, we recommend generalized non-linear mixed-effects model (NLME) when there were two or less tree height measurements taken in a given stand. The basic NLME model could be calibrated when there were 3 or more tree height measurements, depending on the required level of accuracy and investigation cost. Additionally, we first reported that soil pH as a covariate variable in H-DBH model and our generalized NLME model implied that the difference in the H-DBH relationship caused by pH varies among different stands. This finding may be attributable to differing biological properties of the similar alkaline tolerance species.     

High fluid shear strain causes injury in silver shark: Preliminary implications for Mekong hydropower turbine design

The Lower Mekong Basin is facing unprecedented threats to fish diversity from hydropower development. There is increasing pressure on developers and construction authorities to design solutions to improve fish survival through turbines, thus protecting the resources in regions being developed for hydropower. A hydraulic characteristic of hydropower turbines with known fisheries impacts is fluid shear stress. Elevated shear stress occurs where rapidly flowing water passes near spillways, screens and within turbine draft tubes. Shear stress can have adverse impacts on fish, but no work has assessed whether this holds true for Mekong River species. A flume was used to determine critical tolerances of silver shark, Balantiocheilos melanopterus (Bleeker), to shear stress rates at a high‐velocity jet which simulated a hydropower turbine. Fish were assessed for injury or mortality following exposure. Results were compared against a no‐shear control. Injury and mortality were greater at higher shear stress exposures. Injuries occurred at all shear exposure levels with mortality at shear levels higher than 600/s. This approach should help design future hydropower turbines if data on other species demonstrate similar results. If the likelihood of adverse impact is high, then shear stress will need to be considered in the design of future hydropower facilities.     

水田机械式强制排肥装置设计与试验

目前水田机械施肥均匀性差，且作业时在施肥开沟器末端容易出现肥料粘结、架空、堵塞开沟器等现象。针对以上问题，本文设计了一种水田机械式强制排肥装置，并对其关键部件进行了结构设计及性能试验。将水田机械式强制排肥部件的工作过程分为3个阶段，通过运动学和动力学研究方法分析了各工作阶段肥料在螺旋强制排肥部件内的状态，以及影响排肥部件工作性能的关键因素，对螺旋强制排肥部件的直径、转速、螺距3个因素进行了设计计算。以排肥均匀性变异系数为响应指标，进行了螺旋强制排肥部件的单因素台架试验，通过对最小显著性差异进行统计分析，确定了各因素的取值范围；安排了二次正交旋转组合试验，并对试验结果进行了方差分析和响应面分析，确定了影响排肥性能指标因素的影响由大到小为转速、螺距、直径，建立了排肥性能指标与各因素之间的回归方程，运用Design-Expert软件对试验因素优化求解，确定了较优工作参数组合为螺旋输送器转速120.09r/min、直径23.90mm、螺距21.54mm，此时施肥装置台架试验的排肥均匀性变异系数为7.18%。将所设计的强制排肥部件分别安装在水稻插秧机及水稻气力式施肥播种机上，进行了田间验证试验，试验结果表明，机械式强制螺旋排肥装置工作稳定、堵塞率低，水田防堵塞效果优于无该部件的施肥机械。